Common Mistakes to Keep in Check When Installing Thermowood Cladding
Undoubtedly, thermowood cladding is ruling the world of designing and has surpassed every other material in terms of popularity. It not only gives the same look as wood cladding does, but by getting heated up at a degree of 160°C to 240°C, it becomes stronger and gets an extension in its lifespan. However, when installing thermowood cladding in your interiors or anywhere, there are some common mistakes that you might make, and it may get too late to even realise it.
To not fall in any such situation, where you may end up removing the cladding and bearing loss, keep these common mistakes in view and avoid them from happening.
Not Leaving Gaps
Though thermowood is heated at a higher temperature to sustain all types of issues and even make it prone to insects, it is never 100% secure. You must always leave gaps between the cladding to give them enough space for ventilation; otherwise, it will be difficult to clean them regularly, and the cramped space can also lead to moisture getting trapped in the worst case.
Improper Installation
When the installation is not done properly, it will not only lead to an unappealing and weird looking surface, but it can also damage the cladding by making them overlap each other. Always ensure that the installation is being done properly and with the right measurements.
Not Using the Right Tools
Not just the thermowood cladding, but every installation must be done using the right tool and equipment. There is no universal screw size or nail for installing thermowood cladding. If you are not much aware about it, it is better that you hire the right professionals to get the task done.
Acclimatizing
It might be a new term, but when you are getting thermowood cladding installed at home, bring them and store them in the space where they are supposed to go. They will first get familiar with the ambiance, and if something has to go wrong like cracking and swelling, it will start showing in the first few days.
Making certain mistakes is common with any type of cladding installation, but when you are getting thermowood cladding installed, it is best to know the common mistakes beforehand so it becomes easier to avoid them.
Common Mistakes to Keep in Check When Installing Thermowood Cladding
Undoubtedly, thermowood cladding is ruling the world of designing and has surpassed every other material in terms of popularity. It not only gives the same look as wood cladding does, but by getting heated up at a degree of 160°C to 240°C, it becomes stronger and gets an extension in its lifespan. However, when installing thermowood cladding in your interiors or anywhere, there are some common mistakes that you might make, and it may get too late to even realise it.
To not fall in any such situation, where you may end up removing the cladding and bearing loss, keep these common mistakes in view and avoid them from happening.
Not Leaving Gaps
Though thermowood is heated at a higher temperature to sustain all types of issues and even make it prone to insects, it is never 100% secure. You must always leave gaps between the cladding to give them enough space for ventilation; otherwise, it will be difficult to clean them regularly, and the cramped space can also lead to moisture getting trapped in the worst case.
Improper Installation
When the installation is not done properly, it will not only lead to an unappealing and weird looking surface, but it can also damage the cladding by making them overlap each other. Always ensure that the installation is being done properly and with the right measurements.
Not Using the Right Tools
Not just the thermowood cladding, but every installation must be done using the right tool and equipment. There is no universal screw size or nail for installing thermowood cladding. If you are not much aware about it, it is better that you hire the right professionals to get the task done.
Acclimatizing
It might be a new term, but when you are getting thermowood cladding installed at home, bring them and store them in the space where they are supposed to go. They will first get familiar with the ambiance, and if something has to go wrong like cracking and swelling, it will start showing in the first few days.
Making certain mistakes is common with any type of cladding installation, but when you are getting thermowood cladding installed, it is best to know the common mistakes beforehand so it becomes easier to avoid them.
